Jensen UV9 User Manual download pdf (Page 16)

UV9

Audio Sub-menu Features

Demo Sub-Menu Features

You can stop/run demonstration mode or turn Demo Auto

Run on/off by chooing the “Demo” option from the SETUP

MENU.

When "Demo Auto Run" is Off, you can select "Demo Mode >

Run" to start Demo Mode. Demo Mode scrolls through the

various source screens, simulating activity on the display.

“Demo Mode” is discreetly displayed in yellow text (below the

clock), to indicate the unit is in Demo Mode. To stop Demo

Mode, press the upper-left quadrant of the TFT (Source

select).

When “Demo Auto Run” is On, the unit will automatically

display Demo Mode when powered on.

Rating Sub-menu Features

The DVD system has a built-in parental lock feature to

prevent unauthorized persons from viewing restricted disc

content. By default, the rating system is unlocked. Once

setup, the parental lock is released only by entering the

correct password. Once the password is entered, rating is

available for setup.

To reset the password, access the “RATING” menu and enter

the current password. Once the correct password is entered,

you can access the “Password” field and enter a new one.

NOTE: Record the password and keep it in a safe place

for future reference. The rating for each disc is marked

on the disc, disc packing, or documentation. If the rating

is not available on the disc, the parental lock feature is

unavailable. Some discs restrict only portions of the disc

and the appropriate content will play. For details, please

refer to the disc description.

Hardware Sub-menu Features

If the rear-view video camera is connected, the unit is on, and

the TFT monitor is retracted inside the unit, the TFT monitor

automatically moves into the viewing position and Camera

mode is selected upon shifting into REVERSE gear. When

shifting into DRIVE gear, the TFT monitor is retracted back

inside unit.

If the monitor is in display mode, the monitor automatically

switches to CAMERA mode upon reverse driving. When the

reverse driving stops, the monitor return to its original input

mode.

P.VOL Sub-menu Features

TS Cal (Screen Calibration)

To access the “Screen Calibration” function from the SETUP

menu, select the “TS CAL” option.

After entering calibration mode, a crosshair appears in a

corner quadrant of the screen. To begin calibration, press and

hold the crosshair for one second until it moves to the next

quadrant. Continue for each quadrant until the calibration is

completed.

Exiting the System Setup Menu

To exit setup mode and resume normal playback, press the

SETUP button (29) on the remote control or touch the BACK

button on the screen.

Setting Options Function

DRC Off Employ the Dynamic Range

Control for better playback for

low volumes.

Loudness Off Turn bass boost on/off

Subwoofer Off Turn the subwoofer on/off.

Sub Filter 80Hz Selecting a crossover fre-

quency sets a cut-off frequency

of the subwoofer's LPF (low-

pass filter).

100Hz

120Hz

Setting Options Function

Password _ _ _ _ Enter a 4-digit password to

activate the “Rating” feature.

Rating 1. Kid Safe Select the appropriate rating

level for the intended audience.

You may override higher rat-

ings by using your password.

2. G

3. PG

4. PG-13

5. PG-R

6. R

7. NC-17

8. Adult

Load Fac-

tory

Reset Select “Reset” to restore the

factory default settings for the

Rating system only.

Setting Options Function

Camera In Normal

Mirror Reverse the camera image as

if looking through a rear-view

mirror.

TFT Auto

Open

On The TFT panel automatically

opens when the unit is turned

on.

Off You must press the OPEN but-

ton (1) to open the TFT panel.

Manual When the ignition is turned

OFF, the TFT panel DOES

NOT retract if it was previously

out

Setting Options Function

Video Input

(Input cir-

cuitry auto-

detects the

video sig-

nal from the

Aux In

source).

NTSC The color signals are output in

the standard NTSC format.

PAL The color signals are output in

the standard PAL format.

Auto The color signal output is

switched automatically based

on the current video input sig-

nal - NTSC or PAL.

Setting Options Function

Source Radio Choose a source for which you

would like to increase the rela-

tive volume (LEVEL).

Disc

USB

Aux In

Navi

Level 0-6 Increase relative volume for

specified source up to 6 deci-

bels.

Setting Options Function

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 83 84

Comments to this Manuals

No comments

Jensen UV9 User Manual Page 16

Comments to this Manuals

Related products and manuals for Car Video Jensen UV9