Jensen JIMS-260I User Manual download pdf (Page 7)

INSTALLATION

FOR TABLE TOP USE

Attach the stand to the main unit as shown in figure 1a below. Attach the stands to the

speakers as shown in figure 1b below.

Fig. 1a Fig.1b

FOR WALL MOUNTING

1) Detach the stands from both

speakers and from the main unit.

2) Use the supplied wall-mounting

template to make anchor hole

marks on the wall. Make sure the

marks are level before drilling.

3) Drill 1/4” holes on the marks.

4) Insert the included plastic

anchors into the holes and push

in until they are flush with the

wall.

5) Insert the included screws into the anchors and tighten until the screw head is about

1/4” away from the wall. Line up the slots located on the back of the main unit and

speakers with the screws in the wall. See illustration below.

NOTE: This unit is not magnetically shielded and may cause color distortion on the

screen of some TVs or video monitors. To avoid this, you may need to move the unit

further away from the TV or monitor if unnatural color shifts or image distortion occurs.

1 2 3 4 5 6 7 8 9 10 11 12 ... 21 22

No comments

Jensen JIMS-260I User Manual Page 7