Jensen JTA-450 User Manual Page 1

JTA-450 3-SPEED STEREO TURNTABLE WITH MP3 ENCODING AND AM/FM STEREO RADIO INSTRUCTION MANUAL PLEASE REA

9USB / CARD OPERATION The following tasks can be accomplished by either using the controls on the REMOTE Control or those which have similar function

102. The track will be repeated and stop until the STOP Button (3) is pressed. 3. To repeat a Folder, press the MODE b

11PROGRAMMED PLAY Programmed play can only be achieved in Stop mode. 1. In stop mode, briefly press the MODE button (14) on the unit. Program Chann

124. To start recording briefly press the RECORD Button once. Copying USB Files

134. Sound will then come out from the system’s built-in speakers and the external Amplifier’s speakers simultaneously. 5. Set the VOLUME CONTROL

14STYLUS REPLACEMENT PLEASE REFER TO THE DIAGRAM BELOW TO REPLACE THE STYLUS. NO ADDITIONAL STYLUS IS SUPPLIED WITH THE SYSTEM. CARE AND

15TROUBLESHOOTING GUIDE Should you experience difficulties in the use of this player please refer to the following chart or call 1-800-777-5331 for

1IMPORTANT SAFETY INSTRUCTIONS WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HI

27. Do not block any of the ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sourc

3FCC NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. T

4LOCATION OF CONTROLS MAIN UNIT 1. Turntable 16. Play / Pause Button 2. 45 RPM Adaptor 17. Record Button 3. Cue-lever (use this lever to lift t

5REMOTE CONTROL UNIT 1. PLAY/PAUSE BUTTON 2. RECORD BUTTON 3. STOP/CD/USB/SD BUTTON 4. SKIP- BUTTON 5. SKIP+ BUTTON 6

6BATTERY CARE i. If the unit is not to be used for an extended period of time, remove the battery. An old or leaking battery can cause damage to the

7TIPS FOR BEST RECEPTION AM – The AM antenna is located inside the cabinet of the main unit. If AM reception is weak, change the position of cabinet

8IMPORTANT: Moving or jarring the Turntable without securing the Tone Arm Clamp (6) could result in damage to the Tone Arm (3). ENCODING RECORDS TO